Add to Cart
Add To Cart
LTL Stage Recycling Timers

LTL Stage Recycling Timers

LTL Stage Recycling Timers
LTL Stage 1 Recycling Timer PanelLTL Stage 2 Recycling TimerrLTL Stage 2 Recycling Timer PanelLTL Stage 3 Recycling TimerLTL Stage 3 Recycling Timer Panel
Click to enlarge image(s)

LTL Stage Recycling Timers are available in 3 models.

The Stage 1 Recycling Timer is an easy-to-use, repeat/recycling timer with a built-in photocell to allow the user to select a Daytime, Nighttime, or 24-Hour mode.

Once the mode is selected, the timer will power on and off the connected device based on the times set by the user.

The wide range of available On and Off times allows for maximum versatility and customization.



The LTL Stage 2 Recycling Timer is a multi-function recycling timer which operates with an extremely high level of accuracy, reliability, and precision all the way down to the individual second.

The Stage 2 is actually 2 separate timers which each control 2 outlets.

For each set of outlets, when 1 is on, the other will be off, and vice versa.

The Stage 2 is designed to activate any device (pumps, fans, lights, etc.) at precise intervals, and it allows the user to select a Day, Night, or 24-Hour mode which the built-in photocell will automatically respond to.

For added convenience and customization, the Stage 2 also allows the user to select how the timers will react in the event of a power interruption.



The LTL Stage 3 Recycling Timer is a multi-function timer designed specifically for HID lighting, and also features 1 output controlled by a recycling timer and 1 output for a nighttime device.

Two of the available 4 outputs are for HID lighting (1200W max combined), and the Stage 3 has unique safety features to accommodate these lights, including an external temperature sensor which will automatically shut off the lights if the maximum temperature is reached, a programmable setting to control the cool-down period of the HID bulbs in the event of a power interruption to prevent damage to the bulbs, a 30 second pre-set time delay between the 2 lighting outputs to reduce start-up surges/high in-rush currents, and it also features an internal clock with a back up battery to maintain accurate timing even in the event of a power outage.

The Stage 3 has a recycling timer which controls 1 of the 4 outputs.
This timer will control any device operating on a repeating schedule and can be programmed to run during the Daytime, Nighttime, or 24 hours.

The recycling timer can also be programmed to stop or continue timer programs in the event of a power interruption.

The LTL Stage 3 Recycling Timer is used to control: 2 HID Lights; 1 Device on a Recycling Timer; and 1 Nighttime Device (outlet powers on only at night).

About Us  ·  Contact Us  ·  Policies  ·  F.A.Q.  ·  Site Map
Merchant Services

Copyright © GreenAroundTheSills.com

Support@GreenAroundTheSills.com